Farmall & IHC Tractors Discussion Board |
Re: 806 sliping out
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by K.B.-826 on September 11, 2004 at 20:05:42 from (209.163.43.119):
In Reply to: 806 sliping out posted by stu on September 11, 2004 at 18:48:24:
The parking brake drops in on it's own while the tractor is moving? That is a very serious problem that will cause major damage if it hasn't already. Describe exactly how it happens. If it was mine, I wouldn't drive it until I got that one figured out. Sounds like you need to take a look at your detents to fix the low range problem. Remove the range transmission cover and see if any of the rollers are missing. While you're in there, you can check for damage to the reverse driven gear from the park lock dropping in. It's the rearmost gear on the top shaft. It really sounds like you need a manual. You'll probably find that your whole shifting linkage needs going through, and a $20 I&T manual will pay for itself. As for the TA, a wild guess would be $2000.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|