Farmall & IHC Tractors Discussion Board |
Re: FARMALL C AXLE
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Randy in NE on June 18, 2004 at 04:25:32 from (216.58.237.20):
In Reply to: FARMALL C AXLE posted by MILLARD on June 17, 2004 at 20:41:57:
You need to remove the axle/bull gear retaining cap. You can either remove the transmission top cover plate like gene b said or you can remove the pto housing. There is an opening into the rear-end/transmission housing. It is a tight fit with your arm. There are two long-winded fine threaded bolts that hold the cap on. Taking it apart you will have to use a rachet to get them out. Of course mine turned too easy for the rachet and too hard for my fingers but I finally got them out. Used a long handle 9/16" box end wrench. A Farmall mechanic buddy said that they jack up the back wheel and then put a wrench on the bolt and slowly rotate the rear tire to spin the bolts out. You probably won't be able to do this to get it apart but is should work when you put it back together.
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|