Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: Any info on changing M disk br
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on April 26, 2004 at 05:51:59 from (12.65.79.178):
In Reply to: Re: Re: Re: Re: Any info on changing M disk brakes posted by jamie on April 25, 2004 at 21:12:23:
I rebuilt my Lambert brakes in 2000, 4 years ago. When I started, no brakes at all on either side. After disassembly and clean up, still no brakes on one side, other side grabbed. Then I took the discs to a clutch/brake shop and they relined them. I sanded the actuators surfaces to take the glaze off them and reassembled, including a used return spring on the inside (trouble finding that) to replace the missing one. The brakes have worked fine since. I suspect your discs have enough oil on them, or are glazed enough that they have lost their friction properties. Not much you can do about that except reline or replace them. As I recall, the reline of all 4 cost me about $100 total. The problem you are describing is common to all the IH dry type disk brakes. The only real solution is relined or new discs plus taking the glaze off the actuator surfaces and replacing seals to get rid of oil contamination. If I were you, I would do my best to keep the brakes you have. I saw an M sell at auction a couple years ago that had the Lamberts. I thought the price was a bit high. Talked with the buyer and he said the reason the bought it was for the disk brakes.
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|