Farmall & IHC Tractors Discussion Board |
Re: 656 amp and oil light
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob on March 28, 2004 at 19:59:19 from (66.163.134.177):
In Reply to: 656 amp and oil light posted by Hurley J. D. on March 28, 2004 at 19:16:37:
There's no place to hook the GEN light into a TRUE 1 wire alternator. If your going to run a GEN light anyway, get a 3-wire Delco alternator. From the terminal that is "HOT" only with the key on, on the ignition switch, connect 12 Volts to one side of the oil light, one side of the generator light, and to the terminal on the fuel gauge labelled "IGN". The other side of the oil light goes to the oil sender, the other side of the GEN light goes to terminal #1 on your 3-wire Delco. Terminal #2 on the Delco alternator is jumpered to the big output stud on the alternator, which is connected to the battery with heavy gauge wire, usually to the stud on the starter solenoid, where the battery cable attaches.
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|