Farmall & IHC Tractors Discussion Board |
Soooooo happy!!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by clanger on February 18, 2004 at 02:07:32 from (80.176.149.33):
Last night my mate and I finshed off the rebuild of my 484 (D179) engine. We had already fitted new sleeves, pistons and big end shells. Last night we fitted the head which had been skimmed and the valves and seats recut (the guides were found to be OK). After fitting all the ancilliaries I couldn't put it off any longer. I turned the key and after a couple of seconds diesel started squirting from the injector unions we had left loose to bleed them. We tightened the unions up and turned the key again.......5 seconds later the she fired right up and quickly settled down to a smooth ryhthmic beat that I'd never heard before. A quick check showed no leaks, no rattles and no more blowing from the breather. I am one happy camper!! I've never done any work as major as this before and the feeling of satisfaction is tremendous. My thanks to everybody on this forum for passing on their advice and stories, it's a great source of inspiration.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|