Farmall & IHC Tractors Discussion Board |
Got a miss on my H
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by 49 Cubber! on February 11, 2004 at 16:24:11 from (206.74.216.62):
#3 cylinder,it starts up great runs maybe 4 or 6 seconds and starts missing,just on that cylinder.I thought maybe a valve problem since I just put new,plugs,wires,points,condensor,cap and rotor.Compression was pretty equal on all 4 so I pulled the valve cover and all of them were set near perfect.Now,I started it back up and pulled one wire at a time off and on #3 you can see a spark jump,but not all the time,when it sparks,the plug fires and the tractor perks up for a second or two and all this starts back up. Ithought mabe a bad plug or maybe a bad wire or even a bad cap,but after changing the plug with another plug on the tractor and same for the wire,and taking the cap off of my restored M and it doing the same thing I dont think any of that was bad.When I put the cap from my H on my M it doesnt skip on #3 like on the H so I can rule that out.Could it possibly be the lobe on the point shaft is work just on #3 and not letting the points open enough on that cylinder.Oh,almost forgot,this is jus at idle,when I get above half throttle,it clears up and runs fine and its a distributor ignition.Thanks!
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|