Farmall & IHC Tractors Discussion Board |
Re: Re: super A tappet adjustment
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on February 05, 2004 at 10:31:03 from (64.228.11.90):
In Reply to: Re: super A tappet adjustment posted by scotty on February 05, 2004 at 10:10:32:
Mike & Scotty: Would you guys believe this, I've never seen the timing marks on my Super A or 130. Now they are on front pulley for a 140 so hard not to see them. I've always set valve tappets by watching stroke of each rocker arm. On timing advance I do it all by ear. If I have to find TDC, number one plug has to come out to find out whether you are on compression or exhaust, so with a light you can see piston come to TDC. Don't try to make your job so difficult. By the way, I learned all of this from a guy that rebuilt about 6 Farmalls per year in the 1950s. IH dealer used to consult him for advise. His name was Russel. IH dealer told my dad once if he had a half dozen Russels around his district, he wouldn't even need a back shop.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|