Farmall & IHC Tractors Discussion Board |
Re: Super C wide front ?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Harold Hubbard on December 29, 2003 at 05:58:42 from (216.114.175.80):
In Reply to: Super C wide front ? posted by riverbend on December 29, 2003 at 05:36:40:
I have done a lot of cultivating with a Super C with the wide front. My father taught me how to avoid the short turns, the same way he had with a team of horses. Count the rows, then after you run down the first row, skip to the center of the piece, and go back down that row, go back up the second row, and so on. If the unplanted end is narrow you still may have to use the brakes to turn tight enough, but at least it's only 90 degrees, not 180. If you need to, skip only to the quarter, continue and cultivate each row a second time in the opposite direction. The Super C wide front is a little bit tender, mine has quite a bit of welding in it here and there, mostly from abuse and accident. I used to have two of them, but one lost both spindles when the hired help took to the ditch at full speed to avoid an idiot. I built an adaptor, and that tractor now has a narrow front from an H. Looks like it's ready to take off.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|