Farmall & IHC Tractors Discussion Board |
Re: Re: Re: H cold valve adjustment
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by FarmallH42 on December 01, 2003 at 19:37:47 from (12.23.184.8):
In Reply to: Re: Re: H cold valve adjustment posted by riverbend on December 01, 2003 at 18:48:13:
It all depends on how the engine was put together. I made sure that everything was nuclear clean when I put my engine together. I cleaned and re-cleaned parts. I also kept an eye on the oil about every 5 hours for the first 25 hours or so - it stayed really clean up until about 45 hours so I didn't change it until 50 - just because we were using it that day and didn't have the time. If the oil looks dirty after 2 hours, by all means change it! And if it is dirty again in 5 hours change again. I should also mention, do not use synthetic oil until it is broken in. Synthetic oil will not allow proper break in. I switched to synthetic when I changed at 87 hours - I use Mobil Delvac 5w-40...
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|