Farmall & IHC Tractors Discussion Board |
Re: Farmall C Information
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Randy in NE on September 09, 2003 at 11:52:25 from (216.58.237.20):
In Reply to: Farmall C Information posted by Rodney on September 09, 2003 at 09:19:12:
Peabody gave excellent instructions for the transmission. The hydraulic unit has a plug on the left side of the unit. It is supposed to be about 1/2" below the opening. It takes less than 1 gallon of hytran fluid. The drain plug is right below the fill plug. Becareful. There can be pressure build up in there. Learned the hard way. Loosen the fill plug, wiggle it a little to make sure there isn't pressure. The screen is on the same side as the fill/drain plugs. Just 4 bolts to take it out. Need to loosen the steering to get it out. The oil takes 6 quarts. Should have two petcocks on the left side of the pan. One is for the low mark and the other for the high mark. There are at least a thousand and one opinions on the brand and weight of the oil. What ever you are happy with. The most important thing is to change it regularly. Enjoy.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Niagra View Mobile - Powered by a 1959 Ford Tractor - by Mark Massey. In 1959 the Niagara Frontier Transit Inc. of Buffalo, New York designed and built six Viewmobiles for the Niagara Frontier Sightseeing Inc. for use as a sightseeing ride at the Niagara Falls State Park, Niagara Falls, New York, powered by a 1959 Ford 611 Tractor.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|