Farmall & IHC Tractors Discussion Board |
Re: Re: 560 Draft/Drawbar Hydraulics
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on July 07, 2003 at 05:41:59 from (209.226.106.40):
In Reply to: Re: 560 Draft/Drawbar Hydraulics posted by Aces on July 07, 2003 at 05:06:31:
Aces: On my 560 those spider gears had enough teeth missing, so all control was lost and hitch would either go to top or bottom and labour to go further. I think Ernie is suggesting the spiders are broken as well. I had to quit using tractor until it was repaired. My tractor had 3 valves so tried putting hitch on another valve and keep going. The hitch valve caped created continuous labour of system. I called dealer on parts to repair. I recall the quick fix was a valve from a 300 parts tractor I had. Of course I completely lost the draft control. With tractor on forage harvester and about two days haylage ahead in windrow, quick was more important than draft control. 100% of use for tractor at that time was drawbar and pto work so I went to M type drawbar.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|