Farmall Tractors Discussion Board |
Cub Electrics
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Chris on September 09, 1999 at 20:59:18 from (216.176.147.40):
I have a Cub with a cutout relay. The battery wire goes into the relay at the BAT terminal and the ignition switch wire runs out from the same terminal to the switch. My question is: Is this setup correct, or should the switch wire run out from the terminal on the other side of the relay coil? Plus, what kind of charge and discharge should I be seeing at idle, loaded, lights on dim, high? Thanks, Chris
Follow Ups:
Post a Followup
|