Farmall & IHC Tractors Discussion Board |
Re: 300U hydrolics
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by big fred on April 25, 2002 at 20:14:52 from (65.219.138.19):
In Reply to: 300U hydrolics posted by Steven Garrett on April 25, 2002 at 17:11:19:
Steven, Rollie is right on your book, it is for a Rowcrop Farmall 300, the hydraulics on the 300 Utiity are different. There should be two valves back where you describe, the inner one (nearest the seat) is the regulator/safety/flow control valve. The flow control part won't be there if you don't have power steering. The outer one is your spool valve that runs your cylinders, and yes it can be reversed by reversing the hoses. In addition there should be a check valve which is a little added-on block just below the spool valve. That's what the hoses attach to, and it keeps your hitch from dropping when the engine is not running. It sounds like you at least need a new lever shaft and lever for your spool valve. I've never had one of those apart, so I don't know if it can be fixed without major effort or not. I did have my regulator/safety/flow control valve apart and found that a lot of the parts were available at my Case/IH dealer. My dealer is actually a Kubota and Cub Cadet dealer, but they used to sell IH and Farmall and still handle parts. You should give Bermuda Ken Updike at Carter and Grunewald a call if you don't have good luck with your local dealer. He seems to have a good reputation with many on this board and they apparently stock a lot of NOS parts that many dealers don't. If you pester me with an e-mail in the next couple days I'll e-mail you some parts book pages that show exploded diagrams of the spool valve, safety/regulator/flow control valve and the check valve, along with a picture showing how they should be oriented on your tractor. I'm in the process of re-assembling my P/S unit this evening or I'd send them off now.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|