Farmall & IHC Tractors Discussion Board |
Re: can not get above 1500 psi
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on May 03, 2007 at 07:03:05 from (76.212.224.60):
In Reply to: can not get above 1500 psi posted by danny beach on May 02, 2007 at 18:01:55:
And WHY do you need more pressure???? , if you are getting 1500 lbs. on a 560 that will do almost everything that ya need to doif the hyd. cyl. is the correct one . Now if you had some mickymouse loader set up that has to small of lift cyl. and your tryen to lift something then you can push up the pressure but keep in mind here that the system can only handel so much . At 1500 lbs. that system will lift a 12 ft. disc. with a 3x8 cyl. or a 540 fourbottom plow on a 2x8 cyl. as for loader operation then there should be three inch dia. cyl. on the lift arms and 2-3 inch. on the bucket .IF ya are using it on a log spliter and it is short on power move up to a 4 inch dia. cyl.
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|