Farmall & IHC Tractors Discussion Board |
broken rocker arms
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by sven on April 04, 2007 at 18:16:26 from (216.193.143.21):
I bought a W-6 recently that had sat some time without running. Oddly, the rocker arms on the #4 cylinder were broken off. I put used ones on and got the tractor runing. When I went to reset the valves, these arms were bent so i put another set on and ran it some more. After running it a while the valves stopped working correctly and when i took the cover off the rocker arms were again almost broken off at that cylinder. I then pulled off the cam shaft cover and the belly pan. The push rod, cam shaft, and lifters all appear normal. What is going wrong here. P.S. I also had the valves reground so there sould be no problems there. Thanks for your help.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|