Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Lead additive
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob Kerr on December 16, 2001 at 07:55:54 from (205.188.197.23):
In Reply to: Re: Re: Lead additive posted by Bill Jones on December 15, 2001 at 23:06:57:
Good info Bill! I found out that the gasoline used pre 1918 was regular lighting gasoline or white gas which we call coleman fuel now. The oil companys decided that autos didn't need the super clean white gas and they could get more gallons of "auto Gasoline" from a barrel of crude since it wasn't as "cleanly refined" as the lighting gasoline.. I read this in a copy of Dykes automobile encylopedia 1919 edition. Dykes metioned that some cars were having problems running on the "new fuel". I wonder what the octane of white gas is? That is what they would have ran in the 1912 caddy. I know the compression ratio on the most of the old hand crank engines was kept low so they wouldn't be impossible to crank start by hand, there were some cars as early as 1912 with self starers of different types but most of the electric starters back then were not real strong. I had a guy tell me the compression ratio on my 10-20 was about 4:1. It is fairly easy to crank (new rings and valves)but I wouldn't want much more compression and have to crank it much. I was on top Pikes Peak this summer and saw an old bronze plaque off away from the touristy stuff, that read Engine test bed for a High Altitude Liberty Aircraft engine, US ARMY 1918. the plaque also stated that the engine was equipped with a "turbo superchager".Not sure what that is exacly unless they were just refering to a turbo forcing air or if there was a supercharger and a turbo running together somehow. I wonder if they used lead in that test? I know they were working on lead in aviaion later than that but that is the oldest reference I have seen as far as a high compression, pressure boosted engine. I have some pictures of the trolley track iron framework at the site if anyone wants to see them.
Follow Ups:
Home
| Forums
Today's Featured Article -
Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|