I'm not sure I described it very well. Here's some more info and some pictures. BTW, 2+ground is what I call a cable with 2 insulated wires (B&W) and one bare wire (ground).
The box is above the counter at the same height as all of the other switches and outlets in my kitchen. The house is about 40 years old and it is my understanding that in MN they use to put the ground and white wires on the same bus. You can see that in this picture of the panel. The black wire is connected to the 15A breaker. I can follow the wire from the panel to the point where it goes up the kitchen wall. I assume it goes straight to the box since nothing else is affected by the breaker being turned off (I've had it off for the last 3 years).
It doesn't make any sense. With the white and ground going to the same bus the voltage between the two should be 0 and it should be 120 between black and white and between black and ground. Instead I have 120 between white and ground 0 between black and white and between black and ground. I don't think this is even possible. Either I have a splice somewhere that someone messed up or my multimeter is messed up.
I hope this makes more sense. Thanks for the help and ideas.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.