Posted by KEH on March 03, 2011 at 13:06:18 from (67.231.167.114):
In Reply to: BUYING A NEW RIFLE posted by Detmurds on March 02, 2011 at 21:32:58:
A brief word on penetration of 30 caliber rifles. After the 30-06 was adopted by the US army it was tested considerably. A 30-06 using military non armor piercing ammunition is supposed to penetrate 1/2 inch of mild steel. Armor piercing ammunition, which has a steel core added to the bullet, is supposed to penetrate 1/2 inch of armor plate, which is hard steel probably similar to leaf springs. The 308 is a little slower and should penetrate a little less but in practice they are probably the same.
Penetration depends on velocity, bullet weight, and bullet construction, with velocity the most important. The Civil War muzzle loaders with large lead bullets would penetrate 1 foot of pine. If fired indide a house it would likely penetrate the walls. High powered modern rifles will do a lot more. Be careful out there.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.