Posted by Dan in North Houston on July 14, 2010 at 19:15:25 from (98.194.136.74):
Pull starter rope broke on the Craftsman string trimmer. Took it apart, turned out to be an easy fix to replace the rope. But, there is a rocker type kill switch on the housing, and when I pulled out the spade lugs on the contacts so I could remove the housing, one of the contacts on the switch came off. Well, of course nobody has one locally that I can find, and it is a special order from Sears and they don't have any in stock at the warehouse, so who knows how long it will take. So I removed the wires from the coil and the ground and installed some 18 gauge igition wire, about a foot long, so I could run it outside the housing and install a toggle switch to get me by for now. Pretty simple fix, except that now there is no spark at all. I have good continuity between the coil and the ground. And yes, I've tried it with the toggle switch in both positions. I can't believe that the spark plug just happened to fail at the same time. The gap between the coil and the flywheel appears to be fixed, so I don't believe that it changed when I removed the mounting screw to replace the ground wire - and I didn't touch the other mounting screw at all. What am I missing?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
