Tractor Talk Discussion Board |
Re: how do I prime an oil pump
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Paul from MI on June 06, 2001 at 20:03:58 from (209.45.201.236):
In Reply to: how do I prime an oil pump posted by davis d on June 06, 2001 at 09:42:53:
All of the methods in the replies will work. One method that will work woth any engine that has an oil pressure gage, usually tapped 1/8"NPT, is as follows: Take an old freon container, or any other closed container that will hold about 30 PSI. At the outlet place a shut off valve leading to a hose with a 1/8"NPT fitting. Fill the container with a quart or two of your favorite oil. Either thru the outlet or the fill hole, pressurize the container with air to about 20PSI. Hook the outlet hose to the gage hole on the engine, open the valve slowly. The air in the container will fill the entire oiling sytem with oil so as soon as the engine starts you'll have oil to everything. I can't take credit, na old mechanic friend showed it to me. Good Luck, Paul;
Follow Ups:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|