Posted by dave2 on January 06, 2010 at 16:41:47 from (139.139.35.70):
Over the last couple years, we bought a couple small places and, on one, built a 10x30 ft leanto type building with a 20x30 foot paddock of grass pavers then leveleled/built up a place and built a roundpen. The other has the same building in 10x20ft w/ a 20x20 paddock. The second one, I had up w/ rafters and, while waiting for the roof metal, was laying and filling the pavers. Coming back with the last load of gravel, I find a guy with a notebook, ruler, and camera checking things out. Turns out, a farmer can build anything he wants and up to 1000 sq ft without permission. I'm not a farmer, so can't build on my own property outside town. So, we've been going thru hoops for the last year to get our horse operation recognized as something more than a hobby. The whole time until I got fed up and put the metal on the second roof, the horses had tarps for roof and walls and looked like sh!t. Now, after dealiong with a guy that made up the rules as we went along, we have someone coming in the morning to look the place over and give his opinion (which will be the decider).
Think everything will go Ok. If so, we'll be there with bells on to collect every dime that other farmers get, every tax break, AND, just for the he!! of it, I'll add on to the existing buildings or build a second on each property and the home place.
Kicker is, if I had a couple of cows or sheep, there would be no issue...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
