Posted by Mike (WA) on November 23, 2009 at 08:29:08 from (69.10.199.3):
Son and wife asked for a combination firehouse/ dollhouse for grandson and granddaughter. Making it a combination seemed like a disaster in the making, so told them I wouldn't do a combination, but would sure do one for each. Son came over to work with me (never did much of that as a child, too interested in books- but now wishes he had more practical knowledge).
Got to the roof- gonna be a 4/12, and we were trying to figure out what the mitre should be. From somewhere in my troubled past (I helped my dad the carpenter a lot as a kid), about 17 1/2 degrees kept coming up in my head. Son is trying to solve it with trig- but he's 15 years out of high school, and is a newspaper editor, so is a little rusty with the math. I ended up drawing and cutting out a triangle on heavy paper, stood it up next to the radial arm saw blade and adjusted it accordingly (came out just about 17 1/2 degrees, and worked perfectly, by the way).
My question is- without resort to any trig tables or super whiz-bang calculators that we didn't have, could we have come up with the angle using trig?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
