lee-technique for your loader to30

Posted by ericlb on June 26, 2009 at 19:14:02 from (12.189.32.38):

ok after seeing your pic's thats what i thought you had, now for a test, the normal way to fill a loader bucket, is; approach the pile to be moved, when at the front, lower the bucket make sure the cutting edge is flat on the ground, but not so hard as to cause the drive tires to lift, it just needs to rest there, then in 1st gear move into the pile, as soon as you feel resistance lift slightly on the bucket, you'll feel the tractor "sink" a little , this loades the drive tires making it harder for them to spin, then start to curl the bucket back as you continue to lift, to get as much material as possible in the bucket, this will take some practice, a full day at least,so dont get discouraged, you have to develop a 'feel' for the machine, let us know how you are progressing, after you can do this fairly well let us know how the machine is working, also dont expect a full bucket every time, you wont be able to get it unless the material is very loose, when i use the loaders at the pit i dont always get a full bucket if im digging on a hard face, and im using 500 horsepower to dig with, hope this helps eric

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]