Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 
Marketplace
Classified Ads
Photo Ads
Tractor Parts
Salvage

Community
Discussion Forums
Project Journals
Your Stories
Events Calendar
Hauling Schedule

Galleries
Tractor Photos
Implement Photos
Vintage Photos
Help Identify
Parts & Pieces
Stuck & Troubled
Vintage Ads
Community Album
Photo Ad Archives

Research & Info
Articles
Tractor Registry
Tip of the Day
Safety Cartoons
Tractor Values
Serial Numbers
Tune-Up Guide
Paint Codes
List Prices
Production Nbrs
Tune-Up Specs
Torque Values
3-Point Specs
Glossary

Miscellaneous
Tractor Games
Just For Kids
Virtual Show
Museum Guide
Memorial Page
Feedback Form

Yesterday's Tractors Facebook Page

  
Tractor Talk Discussion Board

Re: Ken McWilliams(synthetic Oil)


[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Ken McWilliams on October 21, 2000 at 17:52:27 from (205.188.192.22):

In Reply to: Ken McWilliams(synthetic Oil) posted by Scott Green on October 21, 2000 at 03:49:34:

Scott,

I've not used synthetic oil at all except for STP. I didn't want to start a debate and overshadow the question that I wanted answered.

I think there are a lot of opinions for and against the use of synthetic oil. There are people that say they got 300K miles out of an engine with synthetic oil, but there are people that have done likewise with Valvoline, Quaker, Pennzoil, Castrol, Kendall, etc.

I'm of the opinion that frequent oil changes to keep an engine clean and the oil film when adequately pumped through open passages to the bearings will keep an engine running for several 100K miles. (I've always changed my oil at 5K intervals. When replacing valve cover gaskets these engines have always been very clean with 100K miles.)

The worst problem for any engine is at startup when the oil has drained out of the engine. This is where most wear is generated. When starting an engine the best thing to do is keep it as slow as possible until oil pressure builds up. I've heard people start and race a cold engine and I cringe to hear it. Fortunately, I have a long driveway and the engine runs at idle allowing the engine and transmission to get oil circulated.

I've seen the demonstrations at shows of the slick 50 engine running without an oil pan and the engine drained. I'm of the opinion - so what! Check and change the oil, treat the engine right and it will last. The film of oil circulating through the rod and crank under pressure are actually floating the crank and rods on the journals. Similar to the air hockey games the kids play.

So why pay for the exotic oil when the standard stuff will suffice when done right.

I have a 98 Ford F250 that uses the oil filter with the rubber check valve built into it. It should have been done years ago to prevent oil from draining back into the oil pan over night. The 5.4L engines were experiencing cold start knock and it was from the oil draining back into the pan. It took this problem for Ford to come up with a fix. All manufacturers should be using a check valve to prevent oil from draining.

Well Scott, this is my long answer to your question.

Ken McWilliams
Dayton, OH


Follow Ups:




Post A Followup

:
:

: Re: Re: Ken McWilliams(synthetic Oil)

:

:

:

:

: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle? ... [Read Article]

Latest Ad: Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request [More Ads]

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy