Posted by RBnSC on May 17, 2009 at 05:05:52 from (216.186.211.72):
I have thought about asking this question for a while because I am sure you guys have done some very interesting things. Myself I thought about some of the race cars, drag and round track we have built but probably a dump truck was the biggest thing. In the early 80's Dad bought two 70's ford tandem dump trucks one was complete with torn up rears the other was a cab, dump body, front axle with only one spring, and a set of rears. So I swapped rears and put the first one to work. These trucks had small v8 cats automatic transmissions and auxiliary transmissions. I had not long finished the first one when dad and my brother came in with an old cab over ford road tractor on the lowboy that they had to cut the trees down that had grown through the chassis to get it out of the woods. Dad says take everything out of that truck and fix the other one. It doesn't seem like much but this truck had 671 and a 10 speed. Long story short it took me several months in between keeping everything else running to put this truck together. In the end it was best truck we had for years. It worked so well that when the other truck broke a crankshaft I got to change it over as well. How about yall? Ron
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.