Tractor Talk Discussion Board |
Re: difference in a regulator and cutout?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Kent on July 26, 2000 at 21:13:51 from (216.248.79.182):
In Reply to: difference in a regulator and cutout? posted by Dug G. on July 24, 2000 at 19:52:30:
Dug G & Tim W, The Cutout is used to connect the Battery to the Generator Field Windings while the egine is running and any regulation is provided externally. I don't recall what the SC uses for regulation. Usually there is a Resistor associated with the Light Switch. This is the case of IHC and my Massey Harris. When you start the engine, the Generator produces a small output which closes the contacts of the Cutout Relay and connects the Battery to the Generator. When the engine stops, these contacts open and disconnect the Battery. A Voltage Regulator has a set of contacts which also provide this Cutout function. Another set of contacts perform the regulation function buy controlling the Field current. Usually the resistor used for regulation is mounted on the bottom of the Voltage Regulator. Kent
Follow Ups:
Home
| Forums
Today's Featured Article -
Identifying Tractor Smells - by Curtis Von Fange. We are continuing our series on learning to talk the language of our tractor. Since we can’t actually talk to our tractors, though some of the older sect of farmers might disagree, we use our five physical senses to observe and construe what our iron age friends are trying to tell us. We have already talked about some of the colors the unit might leave as clues to its well-being. Now we are going to use our noses to diagnose particular smells. ELECTRICAL SMELLS
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|