Tractor Talk Discussion Board |
Re: Can someone please explain how a modern hydrostatic transmission works?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob on July 07, 2000 at 06:09:52 from (192.232.120.194):
In Reply to: Can someone please explain how a modern hydrostatic transmission works? posted by Fargo on July 06, 2000 at 11:50:18:
Typical hydro transmission consists of a variable displacement hydraulic pump (driven by the engine), and a fixed displacement hyd motor attached to the final drive. The operator controls ground speed by setting the transmission "speed" lever. This in turn varies the pump displacement, hence the fixed displacement hyd motor speed and ultimately the tractor ground speed. Some advantages: Infinitely variable speed control, ability to change ratio under load, clutchless reversing on some designs. Disadvantages include first cost, fuel economy (figure 20% or so penalty over the same machine with gear drive) and repair cost. Properly designed, operated and maintained hydro transmissions can be as reliable as a conventional transmission. Some however don't well under hard use (early Ford Select-o-speed).
Follow Ups:
Home
| Forums
Today's Featured Article -
Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|