Sorry, you done hit it 100% wrong with all due respect. Your perception is indeed accepted by 99% of the folks that install locksets.
So you understand in simple terms as best I can describe it, best just try this and see for yourself.
That small rod MUST NOT ENTER THE HOLE IN THE STRIKE PLATE. (notice there is no extra opening for it from the factory?) Open your door and take your finger to the larger cylinder and slap it in with ease. Now hold the small rod in...this would simulate it not entering the hole in the strike plate. Now try to push the large cylinder in! Use a hammer if you so choose, it will not depress, thus making it less apt to be opened with a credit card.
I have found almost 100% of the locks instaled as you suggested, thats why I posted this.
Now so we all know locking your front door is just a feel good ordeal we all accept. Yet more than likley it has a window in the door, or maybe we have other windows in our houses any way.
Sorry if I come across as a bad guy, I just feel this kind of stuff is interesting to many.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.