When Dad and I reloaded we loaded 60 grains of 4831, Old 40mm Pom-Pom powder I think, behind a 150 grain Sierra bullet. This gave around 2700 FPM muzzle velocity. The loading table listed 61 grains of 4831 as max load. 60 grains would fill the case completely full. Rifles were a 03 Springfield and a Mauser 98 re-barreled to 06 Douglas barrel. Dad later built a 300 Win., FN Mauser action, Douglas barrel. Dad carved the stocks on all three rifles from a Black Walnut tree he cut when I was 2 months old. He let the stock blank cure for fifteen years before he touch the first one for the 03. The blank he used on the 300 had cure 18 years before he began the whittling. The load we used on the 300 was 83 grains of 4831 behind a 150 grain bullet. Mussle Vel. was about 3500 FPS. Used this round to almost blow a ground hog, Wood Chuck, into a 200 yards. This round also shoot through the front shoulds of a deer at 400 yards. Kent
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.