Tractor Talk Discussion Board |
Re: Aux Hydraulics MF 165
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Bil B on April 06, 2000 at 21:28:49 from (32.101.208.162):
In Reply to: Aux Hydraulics MF 165 posted by Ken Green on April 28, 1998 at 17:41:24:
: I can't get the aux hydralics on my MF 165 to work. The 3 point lift works OK but when I attach my recently acquired Vermeer bale lifter, nothing happens. the bale lifter seems to have hydraulic fluid in it when I press the quick disconnect ball valves. the MF 165 Aux Hydraulic ports may never have been use. I have checked the manual but don't see anything wrong. Is there some valve that I need to turn. How can I isolate the problem to either the tractor or the lifter? : Any other sugges Hi, Depends if you have an aux pump or are running off the pump that contols the 3 point hitch, I have both. If you have two leavers under the seat you have to use the constant flow on the 3 point hitch. If you have this let me know and I will tell you how to set it up. One with aux pump its active all the time and runs off a external lever. Bill,
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|