Posted by Mike (WA) on November 21, 2008 at 08:57:04 from (69.10.198.224):
In Reply to: Re: Retirement! posted by Buzzman72 on November 20, 2008 at 18:49:22:
I worked for the Farm Credit System from 1974 to 1984, and again from 1990 to 1995- we had a "defined benefit" retirement program (your retirement payment was based on salary and years of service, by a set formula). Long about 1995, they started pushing us to convert to a "defined contribution" plan- basically, a 401k to which we contributed, and they partially matched. In the process, we would also cash out our defined benefit program. They calculated the cash payout, and I was surprised by how small the payout would be, compared to what I could normally expect to draw from the defined benefit program. Of course, they were using wildly optimistic projections on return, which turned out to be false. The pressure was there to convert- letters from the "big guy" (he was about 5'6" tall, as I recall), etc. One day our local manager called me in- when he started talking about the retirement conversion, I figured, here comes some more pressure, because he was always a pretty good "company man". Surprisingly, he opined that with all that pressure, conversion must be a pretty good thing for them, but not so hot for us. He didn't convert, and neither did I.
Looking back, those who converted really got hosed. Looking at what I've made on other stock investments since, their cash-out would have lasted me about 7 years, at the same monthly payout as I'm getting from the defined benefit pension. I started drawing it when I was 56, so now at 60, I'd be more than half way through my retirement money! And that's assuuming I'd been smart enough to get out of the market last spring, before it imploded.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
