When considering costs, you really need to sit down and define what you want in a home, from pre-conception to finished product.
Make up a floor plan, each level, start doingt quantity take offs, the more line items in your estimate, the more accurate your estimate will be.
Specifics from the foundation, framing, exterior, finishes, mechanical, electric, plumbing can be arrived at if you put some time into the thought/design process.
A residential home is not all that complicated to estimate, though floor plans and the general layout can get more complex when you design something that has unique features.
Make a quantity take off sheet, line items on the left, quantify each, then plug in prices. This is material only, labor is obviously separate.
You can systematically tally up everything you will need, also make sure to include 15%-20% waste on some materials.
My friend had his foundation built in the spring, his business is seasonal, so he started framing in his off months, mid October to mid to late March, by new years it was entirely framed out, roof on and windows ready to go in, by May, he could live there, it was 2500 sq ft +, design from a book, which he tweaked to his liking. 85% of the work he did himself, yeah he worked his hands to rough split callouses that winter, no easy task, but it was livable in 6 months or so. No doubt as to what one can accomplish if you stay focused on it, this was '99-'00, now 8 years later, long driveway is paved, stone walls, landscaping, out building in the back, place looks awesome, worth some $$ too.
Modulars are also well worth looking into, here is a high end manufacturer, I've met their people and have looked at some of their homes now occupied, pretty good product with a lot of versatility, you just have to finalize everything you want up front, tolerances are excellent, you can't tell these are modulars unless you know what to look for or someone tells you.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.