Posted by RodInNS on September 04, 2008 at 05:51:40 from (216.118.158.123):
In Reply to: grease!!! posted by djw on September 03, 2008 at 17:48:14:
Yes, there's different weights of grease. There's at least 3 that i know of (EP 0, EP 1 and EP 2) with 2 being heaviest. Then there's different formulations and additives, etc. I think you may find that using only one grease for everythign doesn't quite fit. I've started using a Moly EP2 on pins and bushings. It seems to work well, but I wouldn't put that in a bearing. In the past I've used a couple of differnent EP2 Lithium complex greases that have high cling and high Timken load ratings. Those are not greases that you want in a grease system, bearing or any other tight channel. I find that they plug the nipples and bearings. The stuff just solidifies in there... so I've gone back to using a very basic EP2 lithium general purpose grease on bearings and other high speed parts and the EP2 Moly on pins. IN the cold weather I'll probably have to give up on the Moly because the EP2 won't pump unless I can get something lighter. If you've got grease flying around, use a bit less... or don't worry about it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.