Posted by jdemaris on May 28, 2008 at 10:51:31 from (67.142.130.40):
In Reply to: Re: grease number posted by Janicholson on May 28, 2008 at 09:55:45:
To the contrary, many of the open-gear greases are thinner by NLGI grade #, not thicker. Common chasis grease in a tube is often NLGI #2.
Most open-case gear greases at NLGI #00 - much thinner - but also stickier. Some common open-gear greases - also used in crawler track rollers:
AMSOIL Spy Grease Synthetic Lithium Complex 00 EP Grease Synthetic Lithium Complex 00 EP Spy Grease (GSF) NLGI #00
Castrol SHL 00 is a synthetic, semi–fluid NLGI 00 grease that combines the stay–put power of a grease with the consistency of a gear lubricant. As a result, Castrol SHL 00 virtually eliminates fluid leakage from wheel seals, hubs and axles, which can be a serious environmental and safety hazard for over–the–road fleets and can increase maintenance costs
Mobilith SHC 007 is an NLGI 00 Grade / ISO VG 460 grease with a synthetic base fluid; it has a recommended operating temperature range of -50º C to 150 º C with appropriate relubrication intervals. Its primary uses are in grease filled industrial gear cases subject to high temperatures, where conventional semi fluid greases will not provide acceptable lubricant life and in non-driven heavy-duty truck trailer wheel hubs. vics - 460 at 40C
Chevron Texaco Dura-Lith NLGI 000 is a semifluid grease formulated to meet the lubrication requirements of underground mining machinery having enclosed gear cases where housings and seals have lost their ability to retain conventional gear oils.
John Deere Cornhead greasse - Primarily for use as cornhead grease but can also be used for many other applications requiring NLGI #00 grease. AH80490/AN102562
Finalube Cornhead grease # 39590 - NLGI #00 green color, Polyurea thickened, dropping point 460F, base-oil viscosity at 40 degrees C - 150 Temp-range 20F - 275F
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
