A set of forks are really handy on a loader, not as easy to operate as a fork lift, but just as good, you'll wonder how you got along with out em.
I've used the type that clamp onto the bucket floor, properly built, they work good, if they clamp onto the bucket securely and are built properly. I remember using a stout set of those on a 977L cat crawler loader, to move ductile iron pipe and string them out individually along the trench, they were pretty good actually.
The other type, like you see on backhoe buckets, that have the 90 deg bend and are pinned to the top of the bucket are a simple design, strong and you can move them back and forth, probably commonly found, bent at that 90 though, some mfr's may be weaker than other. Easy to take on and off, probably the simplest desgin too.
Not sure if you could do a quick tach deal for a regular forklift set to mount on/off easily, they have the ability to slide and latch in place, and might not be bent to make the 90, I think those are stronger.
You may have to do some fabrication, check dimensions, do a search on the net there are plenty of manufacturers of these, should give you some ideas.
I built a clamp on set out of set of vehicle lift, lift arms I found on a job site, need to modify them to make em stronger, but they work for now, slightly crude, but free except the threaded rod and large nut I welded to the top and they'll hold a stack of 4-5 foot long firewood logs.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Niagra View Mobile - Powered by a 1959 Ford Tractor - by Mark Massey. In 1959 the Niagara Frontier Transit Inc. of Buffalo, New York designed and built six Viewmobiles for the Niagara Frontier Sightseeing Inc. for use as a sightseeing ride at the Niagara Falls State Park, Niagara Falls, New York, powered by a 1959 Ford 611 Tractor.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
