If you watched them closely, they next time you split your tractor you can do it yourself. I am not a mechanic and did not even farm until I was 52 and started dabbeling with old tractors and farming. Have split a few old Cases to do clutches and rear mains or transmission seals since then. Last summer I was mowing my road bank with my 300 case. All Of a sudden I had no clutch. It was completely gone. This happened right in front of my neighbors house and he was watching. I told him clutches go gradually, not just all of a sudden in one second. Besides, I had put in new clutch plates (2 in series) just last year when I bought the old girl and got it going after setting 15 years. The clutches were rusted together and the tractor would hardly come apart. Well anyway, I took it straight back to my shop and split it again---- had it seperated in one hour. When I had split it before I had not noticed the (Fork) proper term? bolt had rusted and just broke into and would not release the clutch. I dug through my parts drawers and found a New old stock fork and bolted it in. Ond and one half hours later I was back in front of my neighbors house mowing again. He asked me what was wrong with my tractor. I told him I just had to split it and fix the clutch. He just shook his head. Did not believe a word of my clutch story.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
