Posted by El Toro on March 11, 2008 at 04:50:50 from (64.12.117.74):
In Reply to: Initial start-up posted by troyr on March 10, 2008 at 08:15:49:
You don't have your plug wires connected on the mag's cap as Dick L's has on his tractor. His No1 plug wire is at about 11 0'clock, No2 at about 7 o'clock, No4 at about 4 o'clock & No3 at about 1 o'clock. Try this and see if the engine will start. Hal PS: If it still won't start and you have fire to your sparkplugs your mag may not be timed on No1 piston when its at TDC on the compression stroke. Its easy to determine that by bringing No1 piston to TDC on the compression stroke. Then remove the mag's cap and see where the rotor is pointing. It should be aligned with the No1 plug wire. Your timing marks should be aligned and both valves should be closed on No1.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.