Ya know, you make a very valid point that contradicts what most other guys say, but it makes perfect sense to me.
We've got an Oliver 1855 (2wd) that we bought about 4-5 years ago now. It has a pair of Coop 18.4 R38 radials on it, but they are getting down there on tread and they have severe cracking around the lugs. They still pull pretty good, but we plan to replace them next year unless some other unexpected expense comes up.
The one really big issue I have with them is the way they ride. They don't lope or anything like that, but they just seem to squirm when on the road, espescially when pulling a heavy wagon of corn silage behind the chopper or when pulling the semi-mounted plow. Our 1755 which had 18.4-34 bias tires had a normal feeling ride.
I know that most of the time the tires are awfull close to being overloaded with just the static weight of the tractor, being that it weighs somewhere in the neighborhood of 14,000 lbs with fluid in the rears, a ROPS/canopy, and a pair of fuel tank fenders I just installed. I was tempted to have dad price out a new pair of radials, but the extra expense just doesn't seem worth it for a tractor that only sees about 100-150 hours a year, and the tires would most likely rot off before they wear off.
What would be your opinion type of tire? If we can find a new pair of Power Mark L/S's I'd go for them, otherwise we'll probably go with Titan L/S bias tires. Our 285 has a 20 year old pair of PowerMark's on it and they still look pretty good. Our dead 1755 has Armstrong's on it, and our 165 has the coresponding tire w/ Titan on the side. They all seem to perform well for us.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.