Posted by Don-Wi on October 25, 2007 at 20:57:29 from (70.224.211.199):
The last 2 weeks I had to switch to 1st shift at work to learn how to program/setup/run a different CNC machining center.
I had a bunch of personal projects laying around for a while, some for well over 2 years and a different shop ago. I stayed a little late evry night or went back after eating supper and worked on them, with basically the whole shop at my disposal because 2nd shift only has 5-6 guys at any given time, vs. all the machines I need to use being occupied during the day when I would have time.
I also have a fairly well stocked tool box so I don't have to go very far either for what I need to use. Makes working on projects go fast, and I still get to shoot the breeze and talk with my normal supervisor and the rest of my crew.
This week I made some new pins for the barn cleaner corner wheels, made new mounts for the *pink* tool box on the side of our 1855 (and I just drove the tractor to the shop because it's close enough), got the worn out hardened bushings out of an ORC pulley for the haybine, and replaced the clutch disk in a clutch pack of a neighbor's JD swather that we used back on '05 for oats. Last week I did a couple other things. My to do list really got shortened up lately...
The clutch pack went out on one neighbors machine, but the other ones had an identical one they had as a parts machine so they let us take it apart and use it to fix the other one. The owner of the one we borrowed ordered a new clutch disk and it's been sitting around since then.
Now when I see their truck at the farm I can bring it over, and ask to borrow their log splitter...
We always fix stuff we borrow and damage in any way, even if it takes a little while some times...
A few years ago we borrowed a disc from the same neighbors who let us steal their clutch pack, and one side of the axel broke. I got some new, thicker channel iron (2 peices welded into a box), cut out the holes on the CNC at school, and welded the new ones back on the axel tube. Brought it back as soon as I had it fixed.
It didn't matter to me that they were both rewelded at some point (poorly) and they didn't hold up, I just fixed it right and didn't complain.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
