I'm putting up a lot of 48" H field fence now in about 250' stretches. I'm putting t-posts every 10' and 4x4's every 50' or so. I use a come-along (hand winch) to tighten. I stick a long pry-bar (you could use a pipe or t-post) vertically through the squares (kind of weave it) at the "loose end" of the fence, secure a chain at top & bottom of the bar & attach the winch hook to the middle of the chain. I then use a strap to attach the winch to a nearby tree or post and have at it. I try and tighten every 50'-75' but have gone 100' because there was nothing to grab onto sooner than that. It tightens up pretty quick. I'm using recycled field fence that I removed from other areas of the property and, as you can imagine, it's not straight like you get off a new roll. I straighten the worst spots by hand before I stretch it and it's not coming out too bad at all. I got the pre-formed clips with the t-posts I bought at TSC. They are a real time-saver instead of using wire off of a spool for tying the fence to the t-posts. I use regular fence staples at the 4x4's.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.