Posted by Steven f/AZ on October 08, 2007 at 07:58:24 from (24.121.167.138):
In Reply to: Synthetic Oil posted by Wild Bill Caldwell on October 07, 2007 at 19:14:38:
My personal experience has been good with synthetic oils. I currently use Mobil 1 exclusively in my vehicles and Mobil Delvac 1 5w-40 in my tractor. I change oil once a year in the tractor and every 6 months in the vehicles, regardless of mileage (usually 6k to 8k). Also, I have switched several high milage engines (150k plus) to synthetic oil without any problems, consumption, or leaks.
Here in AZ where the ambient temp can hit 125 degrees in July and August, I feel that the extra protection of synthetic is a must. In ND, where my tractor is located, the ambient temp can be -35 degrees in January and I fell the extra protection and cold flow characteristics of synthetic is a must.
Having said that, I went many years on whatever was the cheapest on the shelf (usually the SuperTech 5 quart jugs) and using a 3k to 4k interval and never had a problem.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.