Laying tile really isn't all that bad at all.If you have 4 straight walls to work with,you have the battle beat!If you don't,start with the wall that you will notice the most.You will need to get tile glue,a glue trowell ,grout,comes in all sorts of colors,and some sponges.You apply the glue with the trowell in a workable sized area,maybe 3' at a time or so.If the tile doesn't have raised notches on all sides,you will need somthing to properly space the stuff,maybe 1/8" or so,to allow the grout to settle inbetween the tiles.After the tile is all down and set,atleast 12 hours,then you can mix the grout(cement) in an old ice cream dish.Apply the grout between the tiles and work it in alittle.Once it is almost dry,wipe off the excess with a damp sponge,not wet,just damp.The grout will shrink alittle,so it will need a second coating.You can use a masonary grinder disk to cut the tiles to fit. Just make a line,maybe half way through or so and snap it off carefully with plastic tipped pliers,or maybe put a cloth rag over the tile and use regular pliers.Best of luck and happy tiling.pd.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.