Tractor Talk Discussion Board |
Re: Welding Question
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Bill From Ontario on October 19, 1999 at 13:58:54 from (206.172.238.118):
In Reply to: Welding Question posted by Highland Joe on October 19, 1999 at 08:32:55:
Buy yourself a temperature stick, and preheat everything to 175-200 degrees F. Then use 7018 or 8018, it should work fine. After your done, post heat so the weld doesn't crack from cooling. Good luck!
Follow Ups:
Post a Followup
|