|
Tractor Talk Discussion Board |
Spreading Fertilizer with old Tractor
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by JRT on March 31, 2007 at 21:22:05 from (64.12.116.14):
Just finished 2 days of spreading fertilizer on 50 acres of hay with a 1965 Case 430. Had to stop twice with tractor problems. Yesterday I noticed my eyes burning from diesel exhaust fumes. While reloading spreader I noticed a small hole in bottom of muffler. Found a spare in the shop that would fit and bolted it on. Wasted 5 whole minutes. Today I noticed the temperature gauge running around 200 degrees. Pulled in the shop, removed the grill screens and found about 1/2 inch of dust and dirt built up from raking 6000 bales of hay last summer. Took the air hose, blew it off and was in the field again. Temp dropped back down to 150 and stayed there. I wasted another 5 minutes on this. When I got done, I checked fuel level and found I had used 2/3 of a tank of fuel in just 2 days. Why do people try to farm with these old machines anyway? However, I have figured out what to do. I can take that $3000 dollars I spent on fertilize and make a down payment on a new Massey or John Deere and do the same next year and use it to make an annual payment for the next 12 to fifteen years and a new tractor will be paid for. And, during all that time I won't be bothered with having to stop and fix all these break downs. But now that I think about it, this could create a problem also. If I don't fertilize, I won't have any hay. So what in the world would I do with that new tractor.
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
