Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 
Marketplace
Classified Ads
Photo Ads
Tractor Parts
Salvage

Community
Discussion Forums
Project Journals
Your Stories
Events Calendar
Hauling Schedule

Galleries
Tractor Photos
Implement Photos
Vintage Photos
Help Identify
Parts & Pieces
Stuck & Troubled
Vintage Ads
Community Album
Photo Ad Archives

Research & Info
Articles
Tractor Registry
Tip of the Day
Safety Cartoons
Tractor Values
Serial Numbers
Tune-Up Guide
Paint Codes
List Prices
Production Nbrs
Tune-Up Specs
Torque Values
3-Point Specs
Glossary

Miscellaneous
Tractor Games
Just For Kids
Virtual Show
Museum Guide
Memorial Page
Feedback Form

Yesterday's Tractors Facebook Page

  
Tractor Talk Discussion Board

Re: IH guys help


[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]

Posted by Owen Aaland on March 29, 2007 at 16:20:32 from (65.165.246.14):

In Reply to: Re: IH guys help posted by TMay on March 29, 2007 at 14:58:21:

The power steering circut is a priority circut. Nothing you do should cause any change in steering function.

Oil is drawn from the bottom of the rear housing, through the hydraulic filter, through tubes cast in the clutch housing, to the steering (MCV) pump. From the pump the oil goes first to a flow divider/priority valve. The flow divider is actually two pieces. Oil goes to an an orfice that allows 5 GPM (3 GPM on 66 and older series) priority flow. Excess fluid is diverted by the flow divider valve to lube the differential. This flow varies with pump speed and condition but the 5 GPM remains constant. A worn pump or a serious leak will cause this flow to diminish to the point where no flow will go to the differential. This is the major cause for rear end problems in IH tractors.

The 5 GPM flow from the flow divider goes first to the steering system and then steering relief valve. This limits the steering pressure to 1600 to 2100 PSI, depending on the tractor. Return flow from the steering and/or steering relief valve is still 5 GPM. One GPM of this flow is used to lube each brake, leaving 3 GPM for the TA control valve, brakes, seat, and hydraulic clutch assist. Pressure in this circut is limited to about 240 PSI. The TA, clutch, brakes and seat are all closed center valves that use oil only while being operated. Oil left from this circut is directed to the TA lube circut. It is limited to about 20 PSI. Any oil above the 20 PSI is returned back to the sump.

Loss of steering while the clutch is depressed can be caused by a weak pump or leak AND a stuck flow divider valve.

Any loss of steering assist can be an indicator that the differential is not being lubed properly. It is critical for the steering to function properly to get long life out of the differential and ring gear and pinion.


Replies:




Add a Reply

:
:
: :

:

:

:

: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle? ... [Read Article]

Latest Ad: Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request [More Ads]

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy