Re: Basic Hydraulic System Help

Posted by J Schwiebert on February 24, 2007 at 10:08:40 from (209.143.51.137):

In Reply to: Basic Hydraulic System Help posted by D13 on February 24, 2007 at 09:51:57:

Let me attach the Gresen valve first. Do you have a casting number? Also I think you are proably refering to a Gresen single spool model 400 valve. If so is the pipe plug on the left side of the handle or what do you really call the end of the valve. If that is what you are refering to iit is the plug that holds the relief valve in place.If this is a normal GM power steering pump there is also a relief valve inside the pump. Are you running a reservoir. What amount of flow and pressure are you really looking for? For the flow you have 3/8 inch or maybe even 1/4 inch work port hoses would do just fine. There are rules of thumb or engineering guideliness for selecting the sizes of your hoses. More questions.

Replies:

• Re: Basic Hydraulic System Help D13 11:46:33 02/24/07 (1)
  • Re: Basic Hydraulic System Help Gerald J. 15:24:51 02/24/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]