|
Tractor Talk Discussion Board |
Delco Remy Generator Questions 6v or 12V?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Gene Cockrell on February 10, 2007 at 11:19:45 from (24.32.184.117):
Hi, I saw your website and thought to take a shot at asking a question I need answered.
This concerns old Delco-Remy tractor generators without ventilation (closed case).
Questions are:
First, how can one tell if you are looking at a 6 or a 12 volt generator if you have it apart?
I am trying to convert an ancient Allis Chalmers B tractor (1940 model, positive ground, magneto ignition) from a 6 volt to a 12 volt system without having to use an alternator but rather a 12 volt generator to maintain appearance. With this said, what I have now is a functioning 6 volt Delco system with a voltage regulator fitted to the generator instead of the original cutout and high/low range switch (switch was burned when I got the tractor).
I have another generator given to me which is supposed to be 12V (from a Case) but after cleanup had a rebuilders' tag indicating that it's 6V. This generator (of course) has no manufacturer's number plate so I am stuck.
Now, I have both units disassembled. I note that the field coils' center plates on the "12V" unit are a bit larger than the 6V unit I removed from the tractor. I also note that the "12V" unit's armature rotor windings seem to be in a different direction than on the 6 V unit.
How do I know if it's a 6V or 12V unit that I got given?
Second question is: Does direction of rotation make a difference when dealing with generators?
thanks for any advice or enlightenment... The 6V system I currently have is just not up to the cranking task which is why I want to replace it. I do have the heavy duty 6V cable and ground strap installed and a fairly new battery. I have to jump start the tractor almost anytime for a hot start which is really aggravating.
///Gene Cockrell
Replies:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
