Tractor Talk Discussion Board |
Re: Rookie scrape blade question
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by paul on September 07, 1999 at 21:17:31 from (209.181.177.182):
In Reply to: Rookie scrape blade question posted by Rookie on September 07, 1999 at 19:35:47:
What happens is you scrape the loose stuff into the low spots, and since it's dry it never packs there, just flies away. So, you need to tear it up deeper, & make it all level and the same again. Hoding it down a little & packing it helps, but probably not practical or worth the effort. Also, when you scrape the drive, if you have a blade that will angle, it works much better to always angle the blade & scrape in to the middle. This makes the drive much less washboardy to begin with. --->Paul
Follow Ups:
Post a Followup
|