Tractor Talk Discussion Board |
Re: OT - pellet stoves
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Midwest redneck on November 27, 2006 at 02:52:52 from (207.148.197.39):
In Reply to: OT - pellet stoves posted by Bill from MA on November 26, 2006 at 17:14:50:
I bought a US stove pellet/corn burner. It works very well, the guys on this site helped me in the decision to buy one. 1. a corn/pellet burner is automatic as long as you fill the hopper every 7 hours or so. 2. a wood stove needs to be reloaded every 3-4 hours or so, at least mine did and it would not save me money on the propane bill because I have to go to work, sleep etc. If you buy a stove be sure it burns corn and pellets. I paid $483 for 2 tons of pellets, that is $4.83 (with tax) per 40lb. bag of pellets. I go through 80 lbs. of pellets in a 24 hr. period. Keep in mind that in the dead of winter the pellets will be $10/day vs. $20/day for propane. Corn in my area is $7/100lb. bag. Corn is a little harder to store but garbage cans are cheap in the long run. IMO----a wood stove is great if you are retired and can load wood into the stove all the time to keep the main furnace from turning on. If I had to guess you will likely go through $5/day of firewood if you had to buy it and burn it in a stove. Firewood can be cheap I just sold 2 pickup loads to a guy for $60, about 2 face cords.
Replies:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
John Deere B 1943
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|