Tractor Talk Discussion Board |
Continential G176 Engine
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Kenneth A. Gasch on July 09, 1999 at 21:14:34 from (12.74.138.20):
Looking for help I have a Massey Ferguson 165 with a continential G176 engine. The engine had very low (less than 5 PSI) oil pressure. I pulled the engine and had the crank turned and cam bearings installed. I reassembly the engine with a rebuild oil pump, new rod & main bearings,and new rings. The engine runs good but it still has very low oil pressure (less then 10 PSI @1500 RPM) I did not trust the original oil pressure guage so I check the pressure with a new one. I know it is impossible to trouble shoot an engine thru the internet, but maybe someone might know of something that is common to the G176 Continential Engine that might cause this problem. Any help you can provide will be greatly appreciated. Ken Gasch
Follow Ups:
Post a Followup
|